Vous êtes ici

HP 2620-24 Switch

The HP 2620 Switch Series consists of five switches with 10/100 connectivity.

The HP 2620-24 Switch is a fanless switch with quiet operation, making it ideal for deployments in open spaces.

The HP 2620-24-PPoE+ Switch, HP 2620-24-PoE+ Switch, and HP 2620-48-PoE+ Switch are IEEE 802.3af- and IEEE 802.3at-compliant switches and provide up to 30 W per powered port. The HP 2620-48 Switch has variable speed fans for quiet operation.

All 2620 series switches include two 10/100/1000BASE-T ports and two SFP slots for Gigabit Ethernet uplink connectivity.

An optional redundant external power supply is also available to provide redundancy in the event of a power supply failure.

With IPv4/IPv6 static and RIP routing, robust security and management features, free lifetime warranty, and free software updates, the HP 2620 Switch Series is a cost-effective solution for customers who are building converged enterprise edge networks.

  • Cost-effective access layer switches
  • Lite Layer 3 IPv4/IPv6 static and RIP routing
  • 30 W PoE+ support on PoE models
  • Gigabit fiber uplinks
  • Enterprise-class features
Ports  
  24 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX)
  Media Type: Auto-MDIX
  Duplex: half or full
  1 RJ-45 serial console port
. 2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
  Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
  2 open mini-GBIC (SFP) slots
Physical characteristics  
Dimensions 10(d) x 17.44(w) x 1.73(h) in. (25.4 x 44.3 x 4.39 cm) (1U height)
Weight 5.7 lb. (2.59 kg), Fully loaded
Memory and processor  
Processor PowerPC FreeScale 8313 @ 400 MHz, 512 MB flash, 512 MB SDRAM, 4 MB flash ROM; packet buffer size: 1 MB
Mounting  
  Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance  
  IPv6 Ready Certified
100 Mb Latency < 8.3 µs (LIFO 64-byte packets)
Throughput up to 9.5 million pps
Routing/Switching capacity 12.8 Gbps
MAC address table size 16000 entries
Environment  
Operating temperature 32°F to 131°F (0°C to 55°C)
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity 15% to 90% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft. (3 km)
Acoustic Power: 0 dB, Pressure: 0 dB No Fan
Electrical characteristics  
  Achieved Miercom Certified Green Award
Voltage 100-127/200-240 VAC
Idle power 13.3 W
Maximum power rating 22.1 W
PoE power 0 W
Frequency 50/60 Hz
Notes Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).
Safety  
  EN 60950/IEC 60950CAN/CSA 22.2 No. 60950EN 60825UL 60950